12 month subscription for Plant /Agri use for almost* unlimited location reporting, with 50 SMS credits.
* A Reasonableness limit of 2,000 position reports per week, and a minimum reporting interval 1min applies.

The tracker's subscription expiry date and SMS credits balance is displayed in each user interface.

See "Price reductions" tab for quantity discounts.

12 month subscription Normal usage for with 50 SMS credits and almost* unlimited, from every 60sec (location) reporting.
* A reasonableness usage limit of 2,000 position reports per week, & a minimum 1 min reporting interval applies. This is far more than even a very heavy user typically uses.

This subscription is for a normal number of alerts or commands by SMS to a mobile phone number in a year. 
It also covers the monthly cost of: TrackServer platform; SIM rental; Data; GoogleMaps license and Support.
The TrackServer apps shows the subscription expiry date and the remaining SMS credit balance.
Customers should set up a reminder of when subscription renewal will be required
Additional SMS credits can be purchased, if needed, by adding them to a basket, etc. See Extra SMS Credits.

FMB020 is a tracking terminal with GNSS and GSM connectivity, which is able to collect device coordinates and transfer them via GSM network to a server.

This device is perfectly suitable for applications, which require the location acquirement of remote objects. It is important to mention that FMB020 has a standard OBD-II interface which lets you monitor basic vehicle parameters.

Fisrt Start Guide: https://wiki.teltonika-gps.com/view/FMB020_First_Start
 

Basic characteristics

GSM / GPRS / GNSS features:

• Teltonika TM2500 quad band module (GSM 850 / 900 / 1800 / 1900 MHz);
• GPRS Multi-Slot class 12 (Up to 85,6 kbps);
• SMS (text, data);
• Integrated GNSS receiver;
• Up to -165 dBm GNSS receiver sensitivity.

Hardware features:

• Built-in movement sensor;
• Built-in Bluetooth 3.0;
• Built-in Bluetooth 4.0;
• Internal High Gain GNSS antenna;
• Internal High Gain GSM antenna;
• 128 MB Flash (422 400 Records);
• 3.7 V 45 mAh

Interface features:

• Power supply: +10...+30 V;
• USB port;
• OBD II;
• 2 LEDs indicating device status.

Special features:

• Fast position fix;
• High Quality track even in high density urban canyon;
• Small case;
• 2 LED status indication;
• Real time tracking;
• Smart data acquisition based on:
  • Time;
  • Speed;
  • Angle;
  • Distance;
  • Ignition or any other I/O event;
• Sending acquired data via GPRS;
• GPRS and SMS I/O events;
• Virtual odometer;
• Jamming detection;
• Configurable using Secured SMS Commands.
• Overvoltage protection.
• Nano-SIM

Technical features

Remote access from TrackServer interfaces allows users to:

• set the frequency for position reporting;
• define a Geo-Fence zone(s) and turn them On/Off; 
• turn On/Off (Arm/Disarm) the Motion detecion function
• send commands (SMS) to the tracker to change settings;
• to set contact details of the alert recipients.
• view battery level.

The large screen user interface - use the TrackServer web-app.  For small screens use TrackServer phone app, or use the small screen Web-app.

FMB020 Certification & Approvals

• FMB020 CE / RED, UKCA
• FMB020 E-Mark
• FMB020 EAC
• FMB020 RoHS
• FMB020 REACH
• FMB020 Declaration of IMEI assignment

12 month subscription for Teltonika trackers only with the Trackserver interfaces, without CAN / telematics data, at 1min (or more) reporting, with an annual reset to 50 SMS credits.

This bundle is ideal for a normal number of alerts by SMS.  The TrackServer apps show the subscription expiry date and remaining SMS credit balance.
Customers can set up a phone calendar reminder of the subscription renewal date. Additional SMS credits can be purchased any time. See Extra SMS Credits.

The TFT100 is a Teltonika 10-97V GPS tracker for electric vehicles/forklifts/teleporters, with option to read CAN-bus / ECU data. See TFT100UART if this is not a requirement.
It has a pre-installed SIM and GNSS and GSM connectivity and waterproof IP67 ingress protection, made in the EU (Lithuania).

It is available in 3 other modifications for different data interface options: RS232, RS485 & UART (no ECU data).

It can detect a range of events / scenarios, including: Eco/Green Driving, Over Speeding, Jamming, Excessive Idling, FallDown, Towing detection, Crash detection, Auto Geofence, Manual Geofence, Trip, Immobilizer, iButton, DOUT control via call, DOUT control via Ignition

It can use different platforms, such as the Trackserver phone app & the trackserver.ie web-app, if only GPS data is, and telematic data is not, required. Other platforms are available where telematic data is required.

It comes with a SIM installed, and is ready to use when powered on.

It has 125MB onboard flash memory for data collection in the event of GPRS network disconnection.

Its compact size and design allows it to be easily located / hidden in a vehicle. It needs to be located in a place with strong satellite signal reception to prevent high battery power consumption.

It has a significantly sized internal 1800mAh Li ion battery, providing an autonomous battery life, of up to 5 days.

Operating modes
The Teltonika TMT250 has five available modes of operation, but 2 are most often used: Normal operation and Deep online Sleep modes.
It is an exceptionally flexible tracker with many alerting options available.

Basic characteristics
GSM / GPRS / GNSS features:

• Teltonika TM2500 quad band module (GSM 850 / 900 / 1800 / 1900 MHz);
• GPRS Multi-Slot class 12 (up to 85.6 kbps);
• SMS (text, data);
• Integrated GNSS receiver;
• Up to -165 dBm GNSS receiver sensitivity.

Hardware features:

• 128 MB internal Flash memory;
• Built-in movement sensor;
• Integrated Li-ion battery 3.7 V, 1800 mAh for TFT100 device;
• Internal High Gain GSM antenna;
• Internal High Gain GNSS antenna.

Interface features:

• Power supply: 10 ... 97 V;
• USB port;
• 1 x AIN1/DIN1;
• 1 x AIN2/DIN2;
• 1 x DOUT1/DIN3 (selectable in configurator);
• 1 x DOUT2/DIN4 (selectable in configurator);
• CAN / RS485 / RS232 / UART communication wires (depending on chosen TFT100 modification);
• 1-Wire®;
• 2 LED's indicating device status.
• Battery life:

  TFT100-22, 3.7V 1800 mAh internal Li-ion battery	Average current consumption	Approximate battery life
  GPRS ON, data sending 1s	130mA	14h
  GPRS ON, data sending 30s	85.6mA	21h
  GPRS OFF	76.7mA	24h
  GPS sleep mode, GPRS OFF	41.4mA	43h
  Online Deep Sleep mode, GPRS OFF	24.9mA	72h
  Deep Sleep mode, GPRS OFF	24.3mA	74h
  Ultra Deep Sleep mode, GPRS OFF	14.2mA	127h

Special features:

• High Quality track even in high density urban canyon;
• Ready for harsh environment;
• Any element event triggers (external sensor, input, speed, temperature, etc.);
• Highly configurable data acquisition and sending;
• Multiple Geo-fence areas;
• Sleep mode;
• Deep sleep mode;
• Configurable scenarios available;
• Real-time process monitoring;
• Authorized number list for remote access;
• Firmware update over GPRS, BT or USB port;
• Configuration update over GPRS, SMS or USB port;
• TCP/IP or UDP/IP protocol support;
• >500 000 record storing;
• Overvoltage protection;
• Bosch CAN Powertrain & Askoll CAN protocol support.

User Platform:
Trackserver phone app, and trackserver.ie web-app.

The TrackServer interfaces allows users to:

• set the frequency for position reporting;
• define a Geo-Fence zone(s) and turn them On/Off; 
• turn On/Off (Arm/Disarm) the Motion detecion function
• send commands (SMS) to the tracker to change settings;
• to set contact details of the alert recipients.
• view battery level.

The large screen user interface - use the TrackServer web-app at trackserver.ie.  For small screens use the small screen web-app at mobile.trackserver.co.uk Link: small screen Web-app.

Configuration and firmware update: FOTA WEB (cloud based solution), Teltonika Configurator (USB, Bluetooth), Configuration through SMS
Alert Scenarios: Alarm button, Man-down detection, Home zone, Inside tracking, Movement/No Movement Events, 50 Manual Geofence zones, Over Speeding, Action on call feature, Real Time tracking, Smart algorithm of GPRS data sending for GPRS traffic saving, Asset tracking
Sleep modes: Online Deep Sleep is the only sleep mode enabled in Trackserver. Others available by SMS command are: Deep Sleep, Ultra Deep Sleep, Low power mode.
Protocols: UDP/TCP/SMS
Data sending: Primary, Duplicate and Backup servers
Security: Configuration password, SMS login and password, Authorized GSM numbers list, TLS
Time Synchronization: GNSS, NITZ, NTP
Supported peripherals: Bluetooth LE Movement sensors, LE Magnet sensors, LE Temperature and Humidity sensors and LE Temperature sensors support, iBeacon and Eddystone beacon support

Dimensions
72,5 x 73 x 27,3 mm (L x W x H)  
Weight: 169g
Water and dust resistant for outdoor integrations (IP67)

OEM P/N: TFT100TSTAA0

Link to Teltonika product webpages: TFT100    (https://teltonika-mobility.com/product/e-forklift-tracker-plus/#features)

Link to Teltonika Wiki webpages:  TFT100Wiki      (https://wiki.teltonika-mobility.com/view/TFT100)

Certifications/Regulatory:  CE/RED; Anatel(pending); EAC; RoHS, REACH, E25, UKCA(pending). 

The TFT100UART is a Teltonika 10-97V GPS tracker for electric vehicles/forklifts/teleporters, without option to read CAN-bus / ECU data. See TFT100CAN if this is a requirement.
It has a pre-installed SIM and GNSS and GSM connectivity and waterproof IP67 ingress protection, and is made in the EU (Lithuania).

The TFT100 is available in 3 other models for different data interface options: CAN (Follow link to: TFT100CAN), RS232, and RS485.

It can detect a range of events / scenarios, including: Eco/Green Driving, Over Speeding, Jamming, Excessive Idling, FallDown, Towing detection, Crash detection, Auto Geofence, Manual Geofence, Trip, Immobilizer, iButton, DOUT control via call, DOUT control via Ignition

It can use different platforms, such as the Trackserver phone app & the trackserver.ie web-app, if only GPS data is, and telematic data is not, required. Other platforms are available where telematic data is required.

It comes with a SIM installed, and is ready to use when powered on.

It has 125MB onboard flash memory for data collection in the event of GPRS network disconnection.

Its compact size and design allows it to be easily located / hidden in a vehicle. It needs to be located in a place with strong satellite signal reception to prevent high battery power consumption.

It has a significantly sized internal 1800mAh Li ion battery, providing an autonomous battery life, of up to 5 days.

Operating modes
The Teltonika TMT250 has five available modes of operation, but 2 are most often used: Normal operation and Deep online Sleep modes.
It is an exceptionally flexible tracker with many alerting options available.

Basic characteristics
GSM / GPRS / GNSS features:

• Teltonika TM2500 quad band module (GSM 850 / 900 / 1800 / 1900 MHz);
• GPRS Multi-Slot class 12 (up to 85.6 kbps);
• SMS (text, data);
• Integrated GNSS receiver;
• Up to -165 dBm GNSS receiver sensitivity.

Hardware features:

• 128 MB internal Flash memory;
• Built-in movement sensor;
• Integrated Li-ion battery 3.7 V, 1800 mAh for TFT100 device;
• Internal High Gain GSM antenna;
• Internal High Gain GNSS antenna.

Interface features:

• Power supply: 10 ... 97 V;
• USB port;
• 1 x AIN1/DIN1;
• 1 x AIN2/DIN2;
• 1 x DOUT1/DIN3 (selectable in configurator);
• 1 x DOUT2/DIN4 (selectable in configurator);
• CAN / RS485 / RS232 / UART communication wires (depending on chosen TFT100 model);
• 1-Wire®;
• 2 LED's indicating device status.
• Battery life:

  TFT100-22, 3.7V 1800 mAh internal Li-ion battery	Average current consumption	Approximate battery life
  GPRS ON, data sending 1s	130mA	14h
  GPRS ON, data sending 30s	85.6mA	21h
  GPRS OFF	76.7mA	24h
  GPS sleep mode, GPRS OFF	41.4mA	43h
  Online Deep Sleep mode, GPRS OFF	24.9mA	72h
  Deep Sleep mode, GPRS OFF	24.3mA	74h
  Ultra Deep Sleep mode, GPRS OFF	14.2mA	127h

Special features:

• High Quality track even in high density urban canyon;
• Ready for harsh environment;
• Any element event triggers (external sensor, input, speed, temperature, etc.);
• Highly configurable data acquisition and sending;
• Multiple Geo-fence areas;
• Sleep mode;
• Deep sleep mode;
• Configurable scenarios available;
• Real-time process monitoring;
• Authorized number list for remote access;
• Firmware update over GPRS, BT or USB port;
• Configuration update over GPRS, SMS or USB port;
• TCP/IP or UDP/IP protocol support;
• >500 000 record storing;
• Overvoltage protection;
• Bosch CAN Powertrain & Askoll CAN protocol support.

User Platform:
Trackserver phone app, and trackserver.ie web-app.

The TrackServer interfaces allows users to:

• set the frequency for position reporting;
• define a Geo-Fence zone(s) and turn them On/Off; 
• turn On/Off (Arm/Disarm) the Motion detecion function
• send commands (SMS) to the tracker to change settings;
• to set contact details of the alert recipients.
• view battery level.

The large screen user interface - use the TrackServer web-app at trackserver.ie.  For small screens use the small screen web-app at mobile.trackserver.co.uk Link: small screen Web-app.

Configuration and firmware update: FOTA WEB (cloud based solution), Teltonika Configurator (USB, Bluetooth), Configuration through SMS
Alert Scenarios: Alarm button, Man-down detection, Home zone, Inside tracking, Movement/No Movement Events, 50 Manual Geofence zones, Over Speeding, Action on call feature, Real Time tracking, Smart algorithm of GPRS data sending for GPRS traffic saving, Asset tracking
Sleep modes: Online Deep Sleep is the only sleep mode enabled in Trackserver. Others available by SMS command are: Deep Sleep, Ultra Deep Sleep, Low power mode.
Protocols: UDP/TCP/SMS
Data sending: Primary, Duplicate and Backup servers
Security: Configuration password, SMS login and password, Authorized GSM numbers list, TLS
Time Synchronization: GNSS, NITZ, NTP
Supported peripherals: Bluetooth LE Movement sensors, LE Magnet sensors, LE Temperature and Humidity sensors and LE Temperature sensors support, iBeacon and Eddystone beacon support

Dimensions
72,5 x 73 x 27,3 mm (L x W x H)  
Weight: 169g   (incl. box: 205g)
Water and dust resistant for outdoor integrations (IP67)

OEM P/N: TFT100TURAD0

OEM P/N: TFT100TSTAA0

Link to Teltonika product webpages: TFT100    (https://teltonika-mobility.com/product/e-forklift-tracker-plus/#features)

Link to Teltonika Wiki webpages:  TFT100Wiki      (https://wiki.teltonika-mobility.com/view/TFT100)

Certifications/Regulatory:  CE/RED; Anatel(pending); EAC; RoHS, REACH, E25, UKCA(pending). 

The FMT100 is an IP65 Teltonika GPS tracker with a pre-installed SIM intended for direct attachment to battery terminals. It uses the Trackserver phone app, and trackserver.ie web-app.
It is ideal for, and designed for vehicles of any description, especially for insurance telematics, car hire, rental/leased vehicles, taxi, courier services, etc.
It comes ready to use when connected to power. It has a huge 35x35mm square internal ceramic GPS antenna and 2 40cm long pre-crimped U terminals for battery connection.
Installation could not be easier - just loosen the battery clamp screws and slide the red or black connector into place, then re-tighten.
It has an internal step-down 10-30V voltage adaptor, and a small internal Li ion 170mAh battery to allow short periods of disconnection. The battery over-voltage protection turns on at 34V, with the tracker turning off.
It has onboard memory for data collection (Flash 128MB for 422,400 records) and upload following GPRS network disconnection/re-connection.
It has a 3M VHB double-sided adhesive foam tape on its back to adhere to a suitable surface. The mounting location needs to allow for the best possible reception of satellite radio signals to prevent high power consumption. This is not always easy in a battery compartment. It is a compact size and should fit almost anywhere.
Like any Teltonika device, it can connect by Bluetooth to external devices and Low Energy sensors, such as Temperature sensors, and report in this data along with GPS information.
Like any Teltonika device, it can not only detect a collision. If so configured, on a Telematic platform, it can be made to report in "Crash Trace Data" which is accelerometer data during (up to) the 15 secs before & after a collision event at 100Hz (100 accellerometer values per second) to allow re-visualisation of the incident. Teltonika have special software tools to help do this. If you require this option, you need to let us know at time of order.
The printed face (front) of the tracker covers the 2 antennae, and flashing LEDs, which may need to be covered to conceal the LEDs and obscure its purpose/function. A 4x8cm label would cover its technical properties/branding, with a possible inscription describing it as a battery conditioner, or suchlike.
Teltonika devices are manufactured in the EU (Lithuania).

Link to Installation video:  INSTALLATION VIDEO   https://youtu.be/oqhC6J5uXlY

Summary
The Teltonika FMT100 has two available modes of operation - Normal operation (28mA) and Deep online Sleep (7mA) modes. It is an exceptionally flexible tracker with many alerting options available through based on configurable scenarios, including motion via its internal accelerometer and its Bluetooth 4.0 communication interface.

Crash/Collision Detection   CrashTraceData   

New 36 month subscription for Teltonika trackers (only) using the Trackserver interface, at 1min (minimum) reporting, purchased after 1Nov2022 (new SIMs), with an annual reset to 50 SMS credits.

This bundle is ideal for a normal number of alerts by SMS.  The TrackServer apps show the subscription expiry date and remaining SMS credit balance.
Customers can set up a phone calendar reminder of the subscription renewal date. Additional SMS credits can be purchased any time. See Extra SMS Credits.

The TMT100 is a long-lasting stand-alone (Backup) Teltonika GPS tracker with pre-installed SIM. It can function as a backup tracker to another, detecting by Bluetooth when the primary tracker has been disabled - double protection.
It has waterproof IP68 ingress protection, and is made in the EU (Lithuania). It has a removable end-face plug. See below
By being configured to report once per day, its slow discharge Lithium thionyl chloride (LiSOCl2) internal battery (7.2V 2200mAh / 15.84Wh), can last up to 3 yrs. There is an internal On/Off switch.
Its batteries are swappable, not re-chargeable. Battery replacement is very simple - pull out end-cap, slide out the main circuit board, unclip batteries & unplug (Molex connector) the battery. No soldering required.

It is capable of serving as a Backup tracker,
It uses the Trackserver phone app, and trackserver.ie web-app.
It comes ready to use when powered on. It has a 25x25mm square internal ceramic GPS antenna under the top (printed) surface.
It has onboard memory for data collection following GPRS network disconnection, with 128 MB internal flash memory (220,000 records).
As it is wireless, it can be placed / hidden in a wide range of locations usually. Its top (printed) face needs to receive satellite signal to avoid high battery power consumption.

It is an exceptionally flexible tracker with many alerting options available.

General characteristics
Weight: 110g, 155g incl. box .
Casing has 4 tie-attachment loops/slots
Dimensions:  Length=78mm; Width=63mm; Thickness=28mm.
Battery: Extremely low self-discharge Li-SOCl2 swappable battery, 7.2V 2200mAh (15,84Wh)
Charging voltage: not applicable.
Antennas are both under the top printed surface.
Status/Navigate LEDs: none.
Alert notification: SMS or email through Trackserver app.
Interface: Ultra-low-power Bluetooth BlueNRG-232 chipset, 2.0 micro-USB, Internal micro-SIM slot.
GNSS: GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS
Cellular: Quad-band GSM 850 / 900 / 1800 / 1900 MHz; GPRS Multi-Slot Class 12 (up to 440 kbps); GPRS Mobile Station Class B
External: Bluetooth Sensors (up to BLE 5.0)

Software:
Trackserver phone app, and trackserver.ie web-app.
Configuration and firmware update: FOTA WEB (cloud based solution), Teltonika Configurator (USB, Bluetooth), Configuration through SMS
Alert Scenarios: Enhanced tamper detection, Accelerometer wake up, GNSS and LBS, Indoor Tracking, Bluetooth sensor support (Light, Temperature, Humidity, etc.), Recover mode, Movement detection, Scheduler with time zones, Tracking on stop / on move, Backup Tracking, Static navigation
Sleep modes: Online Deep Sleep is the only sleep mode enabled in Trackserver. Others available by SMS command are: Deep Sleep, Ultra Deep Sleep, Low power mode.
Protocols: UDP/TCP/SMS
Data sending: Primary, Duplicate and Backup servers
Security: Configuration password, SMS login and password, Authorized GSM numbers list, TLS
Time Synchronization: GNSS, NITZ, NTP
Supported peripherals: Bluetooth LE Movement sensors, LE Magnet sensors, LE Temperature and Humidity sensors and LE Temperature sensors support, iBeacon and Eddystone beacon support
Remote access from TrackServer interfaces allows users to:

• set the frequency for position reporting;
• define a Geo-Fence zone(s) and turn them On/Off; 
• turn On/Off (Arm/Disarm) the Motion detecion function
• send commands (SMS) to the tracker to change settings;
• to set contact details of the alert recipients.
• view battery level.

For large screens, use the TrackServer web-app at www.trackserver.ie
For small screens, use the TrackServer (downloadable) phone app, or the small screen web-app at mobile.trackserver.co.uk Link: small screen Web-app.
The Trackserver interface provides the Teltonika TMT100 with two available modes of operation - Normal operation and Deep online Sleep modes. Others are available by SMS command.

TAT100 Parameter list: TAT100 Parameter list
TAT100 SMS/GPRS Commands: TAT100 SMS/GPRS Commands
TAT100 First Start: TAT100 First Start
 

Certifications/Regulatory(pending)    CE(RED), EAC, RoHS, REACH. 

The FMB965 is the successor to the FMB920 with a bigger internal battery (1200mAh) and improved housing, with a pre-installed SIM, is EU made, and has GNSS and GSM connectivity. It is ideal for motorcycles.
It uses the Trackserver app and trackserver.ie web-app, if telematic data is not required.
It comes ready to use when powered on. It has a 25mm square internal ceramic GPS antenna and a 5 conductor cable for 1 Digital Input & 2 Digital outputs. It does not need a wiring kit.
It comes with a 128MB memory on-board for data collection/caching when the GPRS network is lost, then uploads when reconnected.
Its compact size and IP67 body (with cable attached) allows it to be easily placed or hidden on motorbikes, jetskis, snowmobiles, boats, SUVs, etc.
Recommended installation uses the red (10-30Vdc) and black leads connecting to vehicle (always) positive and (always) earth respectively. Using the Digital inputs to operate a fuel supply cut-off relay should only be done by a qualified person.
The printed face (front) of the tracker covers the antennae, and so must be orientated towards the sky / road /interior for satellite radio signal reception.

Operating mode
The Teltonika FMB920 has two available modes of operation - Normal operation and Deep online Sleep modes.

General characteristics
Weight:  58g and 241g including packaging. Does not come with a charger.
Dimensions:  Length=79mm; Width=43mm; Thickness=12mm
Battery:  Lithium polymer (LiPo) 1200mAh 3.7V is small with a short battery liife of about 4 days autonomous power.
Charging voltage: 6 - 30Vdc


Characteristics
Quad-band operation 900/1800MHz (Most of world) 850/1900MHz (Americas)
Integrated GNSS receiver - Cold start: 35s (unobstructed sky), Warm start: 25s, Hot start: 1s (already on)
GPRS class 12, and up to -162dBm GNSS receiver sensitivity and jamming detection
Over-voltage protection with 34V turn off
Built-in GNSS and GSM antennas, Bluetooth 3.0 and movement sensor
2 LEDS indicating Navigate and Modem status.
Tracking: 33/99 acquisition channels. -165dBm sensitivity,  NMEA-183 protocol
GPS, GLONASS, GALILEO, BEIDOU, SBAB, QZSS, DGPS
Accuracy(hot): <3m
Internal 128MB SD card to store data cached when GSM/GPRS connection is lost.

Interfaces
1 Digital Input - Yellow
1 Analog Input - Grey
1 Digital Open-collector Output (connecting external relays, LED, buzzers etc.) - White
+ve Power supply - Red
-ve/Gnd Ground - Black
Built in accelerometer
Internal backup battery
Power supply (+6…+30) V DC with overvoltage protection
Internal High Gain GNSS antenna
Internal High Gain GSM antenna

Remote access from TrackServer interfaces allows users to:

• set the frequency for position reporting;
• define a Geo-Fence zone(s) and turn them On/Off; 
• turn On/Off (Arm/Disarm) the Motion detecion function
• send commands (SMS) to the tracker to change settings;
• to set contact details of the alert recipients.
• view battery level.

The large screen user interface - see TrackServer-Desktop for more detail.  For small screen (phone app) mobile access and control use the TrackServer iOS App orAndroid App, or use the small screen Web-app.

Certifications:

CE; Anatel; EAC; E25