The FMB204 is a Teltonika FMB204 tracker with a pre-installed SIM and GNSS and GSM connectivity, 5 day battery life and is EU manufactured. It uses the Trackserver phone app, and trackserver.ie web-app.
It uses 2G networks, which unlike 3G which is gone, are going to be around for many years (2033 at least) because the IOT / metering workplace relies on it.
It comes ready to use when powered on. It has a 15mm square internal ceramic GPS antenna and 10 conductor cable. It does not need a wiring kit.
It has onboard memory for data collection following GPRS network disconnection.
Its compact size allows it to be easily placed or hidden. It needs connection to always-on power ideally located in a place with strong satellite signal reception to prevent high power consumption.
It has a significant internal Li ion battery, 1800mAh which charges in 90mins. It provides a battery life, of ca. 5 days, standalone or after disconnection from external power.
Normal installation uses only the red and black leads connecting to vehicle (always) positive and (always) earth respectively. Using a digital output (e.g. DOUT1) to install / operate a fuel cut-off fuel pump relay needs to be installed only by appropriately qualified technicians.
The printed face (front) of the tracker covers the antennae, and so must be orientated towards the sky / road /interior to optimise satellite radio signal reception.

Summary
The Teltonika FMB204 has two main modes of operation - Normal mode and Deep Online Sleep mode. It is an exceptionally flexible tracker with many alerting options available through its many digital & analog inputs and outputs.

General characteristics
Weight:  176g and 214g including packaging. Does not come with a charger.
Dimensions:  Length=88mm (including cable gland); Width=73mm; Thickness=38mm. Cable (10 strand) length ~83cm.
Battery:  Lithium polymer (LiPo) 1800mAh 3.7V has a battery liife of about 5 days autonomous power. Battery may require connection when delivered.
Charging voltage: 6 - 30Vdc
Antennas and Status/Navigate LEDs are on printed side, which needs be installed facing the outside world, to favour satellite signal reception.


Characteristics
Quad-band operation 900/1800MHz (Most of world) 850/1900MHz (Americas)
Integrated GNSS receiver - Cold start: 35s (unobstructed sky), Warm start: 25s, Hot start: 1s (already on)
GPRS class 12, and up to -162dBm GNSS receiver sensitivity and jamming detection
Over-voltage protection with 34V turn off
Built-in GNSS and GSM antennas, Bluetooth 3.0 and movement sensor
2 LEDS indicating Navigate and Modem status.
Tracking: 33/99 acquisition channels. -165dBm sensitivity,  NMEA-183 protocol
GPS, GLONASS, GALILEO, BEIDOU, SBAB, QZSS, DGPS
Accuracy(hot): <3m
On-board data cache for when GSM/GPRS connection is lost.

Interfaces
DIN1 Digital Input 1 - Ignition - Yellow
DIN2 Digital Input 2 - White/Green
DIN3 Digital Input 3 - White
AIN1 Analog Input 3 - Grey
DOUT1 Digital Output 1 - White/Orange
DOUT2 Digital Output 2 - Violet
1-Wire Data - Green
1-Wire Power - Blue

+ve Power supply - Red
-ve/Gnd Ground - Black
Built in accelerometer
Internal backup battery
Power supply: +6 to 30 VDC with overvoltage protection
Internal High Gain GNSS antenna
Internal High Gain GSM antenna

Remote access from TrackServer interfaces allows users to:

• set the frequency for position reporting;
• define a Geo-Fence zone(s) and turn them On/Off; 
• turn On/Off (Arm/Disarm) the Motion detecion function
• send commands (SMS) to the tracker to change settings;
• to set contact details of the alert recipients.
• view battery level.

The large screen user interface - use the TrackServer web-app.  For small screens use TrackServer phone app, or use the small screen Web-app.

Certifications:

CE; Anatel; EAC; E25