In stock


Price incl. VAT, add delivery

Delivery weight: 975 g
Price reductions

The Pulsar-100 is a tracker with a 1 year battery life, when reporting its position 1 or 2 times per day in Battery Save mode, inside a 4mm steel channel housing that can be welded or bolted to an asset. There is a complementary subscription plan for this product - the EcoSub_12m subscription option. The Pulsar-100 is only available on this very competitive subscription basis, and not with credit bundles. It is shipped in Battery Save mode reporting every 12 hrs. Customers are asked to read the self-training material in the HowTo/BatterySaveMode section on this website.

The Pulsar-100 is designed for long term isolated stand-alone use where it is permanently attached to something like a trailer, a horse box or a skip. The fact that it only reports up to 1 or 2 times per day in Battery Save mode gives its a battery life or approximately 1 year before it sends a text or email message to the contact number/address when only 20% of the battery power remains. It will obviously be necessary for its owner to charge and replace it after receiving this alert.

Recharging is achieved by removing the tracker from the steel shell using a 2.5mm Allen key screwdriver. Once removed, the case can be opened by rotating the baseplate of the ABS casing by 180degrees, then opening the Zip-Lock polythene bag inside the casing that protects the battery and tracker circuit board. The supplied USB Mini mains charger lead can then be inserted into the tracker's USB Micro port. Re-charging the 10Ah Lithium Polymer battery may take 8-10 hours.

It is suited to long term asset protection. It comes with a fitted SIM that roams in all developed countries worldwide. It works from when it's delivered. We offer a low cost reminder service for when customers want to be reminded about a battery dropping below 20% or a subscription's expiry.

If being welded onto a chassis, the trracker must be in Battery Save mode to avoid dircuit damage. Its technical properties are similar to those of the Prime2-ME tracker. Its ABS plastic box is pop-rivetted to make allow it to open when removed. It is dust and water-tight to IP67. Its GPS and GPRS antenae are located on its bottom edge surface, the end with the removal screw/wingnut, which must be oriented towards the outside world (road, window, etc.) so as to receive the weak satellite radio signals from space. It must not be surrounded on this side by additional metal.

As with any of our trackers, there are 7 user interfaces, of which at least two or more will suit any internet access equipment type or operating system. The recommended user interfaces are the Tracking Apps forsmall screens (mobiles) and large screens (computers).These largely supercede the Tracking panel for Windows or Mac users (except for Chrome); the Tracking panel mobile (HTML) for anything; the free iOS app for iPhone or iPad users, the Android app and finally the Device Management Consul (HTML) also works on anything for summary info from a large number of trackers.

The available alert options when in BatterySave Mode, by email or SMS text message, are:
   Battery low - when it goes below 20%;
   Zone alerts - if it leaves or enters defined zones;

General characteristics:

Pulsar-100 General Characterisitcs



Technical Interfaces

  • L * W * H:  125mm * 80mm * 55mm


  • USB connector: USB Micro female panel mount
  • Weight:  975g
  • IP67


  • Re-charge time: 8hrs on UK mains charger 220V; 1A
  • Battery:  10Ah   3.7/4.2V   Ext. charging voltage: 5V


  • Transmit protocol: TCP, UDP, SMS, Air interface
  • Fitted M2M SIM roams developed world - see website


  • Report frequency: 3 times per day in Battery Save mode only
  • Certifications: FCC; PTRB; CE; RoHS


  • Motion Detection: 3 axis; 8g  Auto-arm timed On/Off



  • Geo-fences: Up to 4 available
  • GPS chipset: uBlox 50 channels, GPS L1


  • Alert options:  Low battery; Zone alerts; Motion (when not in Battery Save mode)
  • Sensitivity(typical): Cold start: -147dBm; Reacquis'n/Monitoring: -160dBm


User Interfaces

  • Accuracy: Autonomous  <2.5m


  • Large screen (IP address):
  • Small screen (IP address):
  • Cold start: <29s;  Hot start: <5s


  • Windows/Mac: (Silverlight) www.mytrackingpanel.com/gps2find



  • iOS App name in App Store: mytrackingapp
  • Modem: 3g GPRS Class B


  • Android App name in Play Store: gps2find
  • Frequency: Quad band 850/900/1800/1900MHz


  • Universal/mobile: (HTML): www.mytrackingpanel.com

Battery Life


  • Multiple device: (HTML): www.mytrackingpanel.com/dmc
  • Battery life:   Normal mode/use: 2-3 months
    Battery Save mode @ 4/day: 9-12 months


PAYG credits: EcoSub_12m subscription only


User interface (7) functions:

  1. to enter the mobile phone numbers or email addresses of alert recipients.
  2. to set the time interval between position reports;
  3. to turn a Geo-fence zone (virtual perimeter) on and off, and position it or size it (5 available); 
  4. to send commands (SMS) to the tracker to change its settings*
  5. to send a command (SMS) to get the device to report its position immediately*;
  6. to switch between Normal and Battery-Save (Stealth) mode (on/off);
  7. to view previous position reports / history as breadcrumb trails on a map, with or without animation (Play);
  8. to export the data from a journey to Excel or CSV;
  9. to turn off the alarm, following an alert;

*  Those setting alterations that use an SMS credit are asterisked, the others don't.

For more technical data, see the Product Data page.


Product Note Status Price
Static subscription 12 months Static subscription 12 months
74.00 € *
1 month(s) = 6.17 €

Prices incl. VAT, add delivery

Display accessory details

We also recommend

Static subscription 12 months
74.00 € *
(1 month(s) = 6.17 €)

Prices incl. VAT, add delivery

Browse these categories as well: Home page, GPS trackers, Standalone trackers