The Prime Bolt-104 is intended for service in a harsh environment for up to 2 years on Battery Save mode or 3 months typical usage. It has a IP67 hard case with a waterproof external USB charging port to make it capable of brief submersion. It contains a Prime2 circuit board and a 10,400mAh battery giving it up to 2 years in Battery (Stealth) Save mode.
It has a 3G modem, a large cache memory allowing it to remember up to 10,000 positions if disconnected from the phone network which it will upload on reconnection. Its 3 internal Neodymium magnets give it exceptionally strong attachment to ferrous surfaces. Along its length it has two sets of cut-aways to allowing it to be secured to any other type of surface using cable ties.
It has an external USB Mini B female charging port behind a screw-secured cover plate to prevent water ingress.
All 5 user interfaces are available to it.
Dimensions: Length=145mm; Width=58mm; Thickness=42mm
Battery: Lithium polymer (LiPo) 10400mAh 3.7V / 80-90 days autonomous power.
Each device comes with pre-installed free credits for initial usage: 200 position credits; 10 SMS credits
GPS chipset: uBlox all-in-one chipset. 50 channel Class 12
Quad-band operation 850/900/1800/1900MHz
Reception - rapid: TTFF (Time To First Fix): 29s (cold start unobstructed sky), 1s (hot start - already started)
External antenna gain: +5dBm at 1575MHz
Precision: +/- 2.5m after first report when warmed up and with a strong GPS signal.
Motion detection: 3 axis accelerometer: 2g
User interface: USB mini B
Charger: Mains charger and USB lead included. It does not require a charging mat.
There is no On/Off button
There is an LED/status indicator, which can covered with tape if not wanted.
Remote access from Tracking Panel allows users to:
- Set the frequency for position reporting;
- View the emergency/panic button status;
- Set a Geo-Fence zone(s) and turn them On & Off;
- Turn On/Off (Arm/Disarm) the Motion detecion function
- Send commands (SMS) to the tracker to change settings;
- Enter mobile phone number(s) for SMS messages or e-mail addresses of the alert recipients.
For full control of the device's settings, see the How To section on using the Tracking Panel for more detail.
For mobile access and partial control of the device's settings using the Tracking Panel (Mobile), see the How To section on ...using the Tracking Panel-Mobile.
PTCRB CE Mark FCC RoHS